Author: Work at UAE

ABU DHABI SHIPBUILDING (ADSB) – May 8,2008

Work at UAE Leave a comment
 a GOVERNMENT OWNED  naval and  commercial ship construction & repair company, is seeking for highly qualified candidates to join their team of highly skilled personnel in  Musafa, Abu Dhabi, United Arab Emirates.

FABRICATORS-

Experience and knowledge as a fabricator in new ship construction or repair to fit all manner of ship structural parts, including tack welding of hull plates and equipment foundations.  Knowledge to read and understand complex ship construction or repair drawings, sketches and documents associated with fabrication.  As a minimum, the ability to understand weld symbols, shapes, datum lines, reference lines, comprehend basic math and fit x-ray joints.  Experience and knowledge to rig assemblies into place, including placing hoist cables and chain falls and to work in confined spaces.  Experience and knowledge of Regulatory Body Rules, Military Specifications and Good Shipbuilding Practices.

WELDERS-

 Experience and knowledge to perform welding using Shielded Metal Arc Welding (SMAW) in the 2G, 3G and 6G positions associated with new ship construction or repair on steel and aluminum vessels; Gas Metal Arc Welding (GMAW) processes on new ship construction or repair on steel and aluminum vessels. Experience and knowledge to perform mirror welding in confined areas.  Ability to set up jobs including caring of equipment and materials.

PIPEFITTERS

– Ability to read and understand piping diagram.  Ability to make templates to fabricate pipes to replace existing ones.  Knowledge various pipe codes and practices.  Capable of making gaskets etc.  Knowledge of flushing / testing of pipe lines.  

SHIP ELECTRICIANS

–  Experience and knowledge to perform installation, repair and testing of ship board electrical systems such as deck equipment, power distribution, intercommunication, electronics, navigation, weapons and lighting systems on Military and Commercial vessels.  Experience and knowledge to read and understand drawings, wiring tables, wiring schematics, documents and sketches associated with electrical systems.  Experience and knowledge to use standard electrical test equipment such as Meggers, Flukes, Amp Meters, Multi-Function Volt-Ohm-Meters, Decade Boxes, Power Supplies, Stroba Tacks, Phase Rotator and Frequency Generator 

MILLWRIGHTS –

Responsible for installing and aligning rotating equipment throughout the ship, including Main and Auxiliary Diesel Engines, Hydraulics and various pumps and pump motors. Knowledgeable in removing and installing shaft, rudders, capstans, anchor drives, air conditioning compressors and equipment (including Freon system), valves (valve overhaul of oil and hull valves, bottom gate valves),  mast, antennas, sea water and chill water systems, as well as lube oil pumps, gauges and systems. Experienced in marine air-conditioning and refrigerant plants. Must be able to take apart and rebuild refrigerant and air compressors. With certificates of training in proper handling and disposal of Freon. Able to read complete drawings with at least 4 years commercial/naval experience.  

BLASTERS/PAINTERS

–Experience and knowledge in preparing areas (scraping of barnacles, dislodging of tanks, degreasing etc.) for blasting and painting, grit or sand blasting and painting of external, internal and confined areas on steel and aluminum vessels, use of high pressure water blast machines, vacuum blaster, blasting pot, airless spray and conventional spray, roller and conventional brush, dew point indicator, and wet and dry mill thickness gauges, and mixing various paints, pot life and curing time 

MARINE CARPENTERS–

Experience and knowledge to perform carpentry or joinery works such as the use of hand tools, power tools, fabrication and installation of wooden furniture, wall panel, plexiglass, trim and finishing items. Installation of formica and application of stains/polish/waxing on board vessels, conventional spray and rollers 

INSULATORS

–Experience of three years or more in marine industrial insulating (fiber glass board, piping and padding made of materials such as calcium silicate and fiber glass) Able to carry at least 40 pounds of materials and wear a respirator.  

SHEET METAL WORKERS–

Experience basic sheet metal layouts of air ducts, off-set and regular transitions and calculates sheet metal bending allowances 

SCAFFOLDERS–

Experience in building or dismantling scaffoldings structures to provide safe working platforms. Able to read drawings for requirements or instructions from the supervisors. Assemble and fit together steel pipes, support beams, braces and clamps to support scaffoldings.  

RIGGERS–

Able to communicate with different equipment operators with knowledge of various hand signals and safety. Can independently erect portable scaffoldings and sling various equipment or materials without causing damage. 

ALBANNA ENGINEERING

Work at UAE Leave a comment
One of the most modern and dynamic business division of the Albanna Group providing turnkey mechanical contracting services to the Oil, Gas, Process and Engineering industries in the entire United Arab Emirates is in need of:

INDUSTRIAL ELECTRICIANS

· 

  Vocational graduate of Industrial Electrician course.

·         With RME license will be an advantage.·         Able to read and analyze electrical schematic and single line diagram.·         Minimum of 5 years acquired experience in industrial facility and commercial building wiring installation.·         On hand knowledge in repair and trouble shooting of power generator, welding machines, VFD controller for overhead crane, pump motors, air-conditioning system and Low voltage electrical panels.·         Knowledge in using different industrial equipment such as multi meter, megger tester, earth resistance meter, cable detector etc.Can work independently with minimum supervision and capable of speaking, writing and understanding English language

ABU DHABI SHIPBUILDING (ADSB)-2

Work at UAE Leave a comment

A rapidly growing naval and  commercial ship construction & repair company, is seeking for highly qualified candidates to join their team of highly skilled personnel in Musafa, Abu Dhabi, United Arab Emirates.

PROJECT SUPERVISOR

This job requires a graduate of certified apprenticeship in shipbuilding or a mechanical, electrical or naval architectural engineering technical school or equivalent in experience.  A candidate must possess effective communications skills in English both verbal and written. The incumbent must have a through knowledge of shipbuilding operations, ship systems, setting to work and test and trials. Demonstrate analytical, organizational skills in directing Foreman or charge hands in their daily tasks based on schedule and budgets and familiar with most PC base applications.

LAMINATING SUPERVISOR

Diploma of certified apprenticeship in FRP boat building or a mechanical technical school or equivalent in experience. A candidate must possess effective communications skills in English both verbal and written. The incumbent must have a thorough knowledge of FRP boat building operations, tooling development, tolerance acceptance, and material engineering. Demonstrate analytical, organizational skills in directing Foreman or charge.

ABU DHABI SHIPBUILDING (ADSB)-1

Work at UAE Leave a comment

 a rapidly growing naval and  commercial ship construction & repair company, is seeking for highly qualified candidates to join their team of highly skilled personnel in Musafa, Abu Dhabi, United Arab Emirates.

OUTFITTING SUPERINTENDENT

Certificate or Degree from an approved Shipbuilding Apprentice program or Degree in Engineering from an approved college.  Minimum of 10 years experience in all phases of building commercial or military new construction vessels, including shipboard testing programs and delivery to the owner.  Strong background in ship construction techniques and resource management, simultaneous management of multiple ship schedules and rapid transition of lessons learned from one vessel to others. Manage new build vessels and monitor the progress of the contract by interfacing all production departments, as well as with the owners, subcontractors, suppliers, classification societies and other third parties involved in the contract up to delivery of the vessel. Ability to develop shipboard schedules and budget and work with multinational work force.

SENIOR PLANNER

Graduate of Business Administration or Engineering, or Certified apprenticeship program in shipbuilding with at least five years experience in shipbuilding planning. Develop strategic/long range planning for the company such as production plan, delivery schedules, key event schedules, build strategy methods, and budget schedules for shipbuilding and repairs. Knowledgeable in detail planning and progress monitoring of various phases of shipbuilding and repair. With experience in using MS Office, Project and Primavera.

COMBAT SYSTEM ENGINEER

Degree in Electrical and Electronics Engineering or other internationally recognized technical qualification in a related engineering field. Minimum of five years experience as an Engineer involved in naval combat system design, manufacture, integration, trials and subsequent support.  Excellent multi-level liaison and team working skills, with the ability to work to budget and program with minimal supervision. Good understanding of the installation and trial aspects of combat system equipment and systems.  Past employment with a combat system contractor and/or as a Naval Weapons Engineer would be considered a major advantage.

 

MATERIAL ENGINEER

 
Degree in Marine Engineering, Marine Architecture or its equivalent with basic knowledge of the various trade operations in shipbuilding and minimum 5 years experience in shipbuilding. For repair projects, provide technical input to Material Planners to develop Bill of Material based on Sales Order and input from Production and Production Planning. For new construction projects, provide technical input to Material Planners to complete material take-off and develop Bill of Material based on Contract and design documents provided by the Ship Designer. Develop and maintain procurement schedules and expedite Engineering, Purchasing or suppliers as necessary to maintain schedule. Participate in ship checks and record material requirements based on recommendations of Production.